Easy Button Load

An Easy Button Load is a way to have Truxton perform processing on an external drive. Everything that Truxton does is put on that drive.

Operating Scenario

Easy Button Load assumes several things:

1. You have forensically collected your media
2. You have created a top level folder on an external drive
3. You have copied the media to that folder
4. There is room on the external drive to hold Truxton
5. In File Explorer, you right button on your top level folder on the external drive and select "Easy Button Load into Truxton"
6. When Truxton completes...
7. You run the Desktop GUI to peruse the data
8. When you are finished, you go to File Explorer, right button on any folder and select "Easy Button Reset"
9. You give the external drive to someone else
10. They attach it to their machine, right button on XXX and select "Use This Truxton Database"
11. When they are done, they "Easy Button Reset"

Example

Let's say we have collected a hard drive, an SD card and a UFED dump of a phone. You attached a Samsung T7 external drive, created a top level folder on that drive named "Collection 1" and copied the data to it. For the rest of this article we will assume the external drive is drive letter D. The drive contains the following:

D:\Collection 1\PC1\PC1.E01
D:\Collection 1\SD1\SDCard.E01
D:\Collection 1\Phone\Report.xml