Truxton Forensic Rack

The Truxton Forensic Rack is a 7 foot tall rack populated with hardware dedicated to forensic processing. It has a Yellowbrick database appliance, seven dedicated loader/exploitation machines and 1PB of usable depot storage. With everything separated, it gives us many knobs to turn for loading.

Hardware

Here's how the hardware is stacked:

U42	Network Switch
U27	Yellowbrick
U26	Yellowbrick Manager 0
U25	Yellowbrick Manager 1
U23	KVM Server
U22	Keyboard and Monitor
U13	Loader Node 7
U11	Loader Node 6
U09	Loader Node 5
U07	Loader Node 4
U05	Loader Node 3
U03	Loader Node 2
U01	Loader Node 1

Installing Hardware

Normally you won't have to do this but should you want to move the hardware out of the existing rack an into a different one, populate the new rack from the bottom up.

1. Locate Server Node 1
   1. Install the rails for the server into the rack position
   2. Slide the server onto the rails
2. Repeat for the remaining servers working your way up the rack
3. Install rails for KVM
4. Install KVM
5. Install rails for Yellowbrick Management Node 1
6. Install Yellowbrick Management Node 1
7. Install rails for Yellowbrick Management Node 2
8. Install Yellowbrick Management Node 2
9. Install rails for Yellowbrick Server
10. Install Yellowbrick Server
11. Populate Yellowbrick Server with 9 blades
12. Fill the empty spaces in Yellowbrick Server with empty blade enclosures
13. Install rails for network switches
14. Install network switches
15. Add the hundreds of cables

Power Up Sequence

Generally speaking, you start the rack from the top down.

1. Turn on the network switches
2. Turn on Yellowbrick Management Node 1
3. Turn on Yellowbrick Management Node 2
4. Turn on Yellowbrick server
5. Turn on the KVM switch
6. Turn on the Servers (7 through 1)

Installing Software

Prior to software installation, several decisions must be made

1. Where are temporary files going to go?
2. Where are the hashsets going to go?
3. Where are the SOLR indexes going to go?