Difference between revisions of "Rack Install Truxton"

From truxwiki.com
Jump to navigation Jump to search
(Created page with "The following steps will install Truxton on the rack. =U01 - Message Bus and SOLR Server= # Run <code>Truxton_Installer.exe</code> # Do not use defaults # Use <code>D:\Truxto...")
 
 
Line 1: Line 1:
 
The following steps will install Truxton on the rack.
 
The following steps will install Truxton on the rack.
  
−
=U01 - Message Bus and SOLR Server=
+
=Detailed Instructions=
 +
 
 +
==U01 - Message Bus and SOLR Server==
 
# Run <code>Truxton_Installer.exe</code>
 
# Run <code>Truxton_Installer.exe</code>
 
# Do not use defaults
 
# Do not use defaults
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Wait for installation to complete
 
# Wait for installation to complete
−
# Stop the [[Les|Load Status Monitor]] <source lang="BAT">net stop les</source>
 
−
# Stop the [[Truxton Service|ETLs]] <source lang="BAT">net stop truxton</source>
 
−
# Delete the files in <code>C:\ProgramData\Truxton\Settings</code>
 
−
# Copy the files from <code>D:\Truxton Data\Search</code> to <code>C:\ClusterStorage\Scratch\U01\Search</code>
 
 
# Run <code>D:\2x5AutoPublish.cmd</code>
 
# Run <code>D:\2x5AutoPublish.cmd</code>
  
−
=U03 - Load Database=
+
==U03 - Load Database==
 
# Run <code>Truxton_Installer.exe</code>
 
# Run <code>Truxton_Installer.exe</code>
 
# Do not use defaults
 
# Do not use defaults
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Wait for installation to complete
 
# Wait for installation to complete
−
# Stop the [[Les|Load Status Monitor]] <source lang="BAT">net stop les</source>
 
−
# Stop the [[Truxton Service|ETLs]] <source lang="BAT">net stop truxton</source>
 
−
# Delete the files in <code>C:\ProgramData\Truxton\Settings</code>
 
 
# Run <code>D:\2x5AutoPublish.cmd</code>
 
# Run <code>D:\2x5AutoPublish.cmd</code>
  
−
=U05 - Node 1=
+
==U05 - Node 1==
 
# Run <code>Truxton_Installer.exe</code>
 
# Run <code>Truxton_Installer.exe</code>
 
# Do not use defaults
 
# Do not use defaults
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Wait for installation to complete
 
# Wait for installation to complete
−
# Stop the [[Les|Load Status Monitor]] <source lang="BAT">net stop les</source>
 
−
# Stop the [[Truxton Service|ETLs]] <source lang="BAT">net stop truxton</source>
 
−
# Delete the files in <code>C:\ProgramData\Truxton\Settings</code>
 
 
# Run <code>D:\2x5AutoPublish.cmd</code>
 
# Run <code>D:\2x5AutoPublish.cmd</code>
  
−
=U07 - Node 2=
+
==U07 - Node 2==
 
# Run <code>Truxton_Installer.exe</code>
 
# Run <code>Truxton_Installer.exe</code>
 
# Do not use defaults
 
# Do not use defaults
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Wait for installation to complete
 
# Wait for installation to complete
−
# Stop the [[Les|Load Status Monitor]] <source lang="BAT">net stop les</source>
 
−
# Stop the [[Truxton Service|ETLs]] <source lang="BAT">net stop truxton</source>
 
−
# Delete the files in <code>C:\ProgramData\Truxton\Settings</code>
 
 
# Run <code>D:\2x5AutoPublish.cmd</code>
 
# Run <code>D:\2x5AutoPublish.cmd</code>
  
−
=U09 - Node 3=
+
==U09 - Node 3==
 
# Run <code>Truxton_Installer.exe</code>
 
# Run <code>Truxton_Installer.exe</code>
 
# Do not use defaults
 
# Do not use defaults
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Wait for installation to complete
 
# Wait for installation to complete
−
# Stop the [[Les|Load Status Monitor]] <source lang="BAT">net stop les</source>
 
−
# Stop the [[Truxton Service|ETLs]] <source lang="BAT">net stop truxton</source>
 
−
# Delete the files in <code>C:\ProgramData\Truxton\Settings</code>
 
 
# Run <code>D:\2x5AutoPublish.cmd</code>
 
# Run <code>D:\2x5AutoPublish.cmd</code>
  
−
=U11 - Node 4=
+
==U11 - Node 4==
 
# Run <code>Truxton_Installer.exe</code>
 
# Run <code>Truxton_Installer.exe</code>
 
# Do not use defaults
 
# Do not use defaults
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Wait for installation to complete
 
# Wait for installation to complete
−
# Stop the [[Les|Load Status Monitor]] <source lang="BAT">net stop les</source>
 
−
# Stop the [[Truxton Service|ETLs]] <source lang="BAT">net stop truxton</source>
 
−
# Delete the files in <code>C:\ProgramData\Truxton\Settings</code>
 
 
# Run <code>D:\2x5AutoPublish.cmd</code>
 
# Run <code>D:\2x5AutoPublish.cmd</code>
  
−
=U13 - Node 5=
+
==U13 - Node 5==
 
# Run <code>Truxton_Installer.exe</code>
 
# Run <code>Truxton_Installer.exe</code>
 
# Do not use defaults
 
# Do not use defaults
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Use <code>D:\Truxton Data</code> as the Depot Data Directory
 
# Wait for installation to complete
 
# Wait for installation to complete
−
# Stop the [[Les|Load Status Monitor]] <source lang="BAT">net stop les</source>
 
−
# Stop the [[Truxton Service|ETLs]] <source lang="BAT">net stop truxton</source>
 
−
# Delete the files in <code>C:\ProgramData\Truxton\Settings</code>
 
 
# Run <code>D:\2x5AutoPublish.cmd</code>
 
# Run <code>D:\2x5AutoPublish.cmd</code>

Latest revision as of 05:43, 4 March 2021

The following steps will install Truxton on the rack.

Detailed Instructions

U01 - Message Bus and SOLR Server

  1. Run Truxton_Installer.exe
  2. Do not use defaults
  3. Use D:\Truxton Data as the Depot Data Directory
  4. Wait for installation to complete
  5. Run D:\2x5AutoPublish.cmd

U03 - Load Database

  1. Run Truxton_Installer.exe
  2. Do not use defaults
  3. Use D:\Truxton Data as the Depot Data Directory
  4. Wait for installation to complete
  5. Run D:\2x5AutoPublish.cmd

U05 - Node 1

  1. Run Truxton_Installer.exe
  2. Do not use defaults
  3. Use D:\Truxton Data as the Depot Data Directory
  4. Wait for installation to complete
  5. Run D:\2x5AutoPublish.cmd

U07 - Node 2

  1. Run Truxton_Installer.exe
  2. Do not use defaults
  3. Use D:\Truxton Data as the Depot Data Directory
  4. Wait for installation to complete
  5. Run D:\2x5AutoPublish.cmd

U09 - Node 3

  1. Run Truxton_Installer.exe
  2. Do not use defaults
  3. Use D:\Truxton Data as the Depot Data Directory
  4. Wait for installation to complete
  5. Run D:\2x5AutoPublish.cmd

U11 - Node 4

  1. Run Truxton_Installer.exe
  2. Do not use defaults
  3. Use D:\Truxton Data as the Depot Data Directory
  4. Wait for installation to complete
  5. Run D:\2x5AutoPublish.cmd

U13 - Node 5

  1. Run Truxton_Installer.exe
  2. Do not use defaults
  3. Use D:\Truxton Data as the Depot Data Directory
  4. Wait for installation to complete
  5. Run D:\2x5AutoPublish.cmd
Retrieved from "https://truxwiki.com/index.php?title=Rack_Install_Truxton&oldid=4686"